Cleaning
ABR cleaning products are gentle to the stone yet tough on the contaminant. Non-aggressive agitation of the surface while cleaning will deliver an even distribution of the cleaning agent to the surface if the cleaning task calls for it.
When cleaning any surface it is important to know the surface composition and the composition
of contaminate you are trying to remove. What cleaning materials and methods are going to
damage the surface? Before beginning the overall cleaning project, test to determine: product
suitability, application procedure , dilution ratio, dwell time, and rinse procedures.
ABR-50 is formulated to remove rust from metal surfaces and stains caused by iron deposits impregnated into stone and masonry. |
Versatile one step building cleaner which is designed to remove surface dirt (and also paint oxidation) from painted or non-painted surfaces. |
Citrus Paint Removers are designed to remove multiple layers of latex paint, oil paint, varnish, stain and other finishes from natural stone, engineered stone, wood, masonry, plastered walls or metal in a single application. |
Citrus Paint Removers are designed to remove multiple layers of latex paint, oil paint, varnish, stain and other finishes from natural stone, engineered stone, wood, masonry, plastered walls or metal in a single application. Also acts as a stain-removing poultice for stone and masonry. |
A concentrated, dissolver of stains, latex paints, varnishes, linseed oils and other coatings. Remove finishes while restoring the wood to the condition of new lumber. |
Polishing compound for restoration of polished marble, granite, slate, travertine, mosaics, onyx and sandstone. |
X-190 Limestone & Concrete Cleaner Restore a like-new appearance to slightly dirty or discolored limestone, travertine, granite, marble, poured concrete, pre-cast, and poured aggregate. |
Alkaline-based, liquid cleaning solution used to remove carbon, dirt and other atmospheric stains from soiled and dirty limestone surfaces.
|
Concentrated acidic cleaner formulated to neutralize and remove any traces of 500 Limestone Prewash left behind after rinsing and will also brighten the limestone surface. |
Economical cleaner for new masonry installations. It is designed to remove excess grout and clean the mortar splatter and staining which occur in new construction. |
Efflorescence and Lime Dissolver Thick gel that clings to the surface providing one coat application for the removal of efflorescence and lime, as well as old mortar splatter from brick, concrete and masonry. |
Economical cleaner for new masonry installations. It is designed to remove excess grout and clean the mortar splatter and staining which occur in new construction. |
