Crack Repair
Crack repair applications include injecting epoxy under pressure into the crack(s) to
permanently ‘weld’ them back together to restore the monolithic strength of the substrate (such
as concrete, granite, limestone, marble, etc.)
The injection procedure will vary by the application, size and location of the crack(s). Cracks
can be injected from one or both sides. Installation procedures may include variations in epoxy
viscosities, injection equipment, injection pressure, and port spacing to ensure full penetration
of epoxy into the crack.
A two-component, exterior grade, clear, medium viscosity epoxy. Flowing |
A two-component, exterior grade, clear epoxy adhesive. Knifegrade |
||
 A two-component exterior grade epoxy adhesive which cures at or below freezing. Knifegrade |
