Bonding Marble
When bonding marble, the following products can be divided into three categories: countertops,
dimensional stone fabrication and job-site assemblies.
Please refer to the countertop section for laminating, setting and seaming for bonding marble.
Most of the Bonstone® epoxies are designed for bonding marble, but here are a few simple
references for deciding which epoxy to use.
If you are bonding marble together in a tight lamination for fabrication shop use, we recommend Bonstone Clear Gel epoxy system for polished surfaces or pre-colored epoxy systems for honed, chiseled and flamed finishes.
There are also a variety of set times and cure times for particular products depending on your
specific needs. If you are working on exterior or interior applications, refer to the product
description for additional instructions.
A two-component exterior grade structural epoxy adhesive. Six hour initial cure. Flowing paste viscosity. Horizontal Applications |
A two-component, exterior grade, clear epoxy adhesive. Two hour set, gel viscosity. Vertical & Horizontal Applications |
A two component, 1:1 ratio structural epoxy adhesive compound developed for setting of stone tile on horizontal or vertical surfaces. Vertical & Horizontal Applications |
A two-component exterior grade structural epoxy adhesive which cures at below freezing temperatures. Vertical & Horizontal Applications |
A two-component exterior grade structural epoxy adhesive which cures at below freezing temperatures. Horizontal Applications
|
A two-component exterior grade epoxy adhesive, pourable liquid. Horizontal Applications |
A two-component exterior grade structural epoxy adhesive, thick paste. Horizontal Applications |
